RPCS3 Freezes every time the 3D part of a game starts (2024)

NovaDorium
Member


0
3 posts

10-01-2022, 06:05 PM -

#1

Hey, this is my first post so I apologize if I make a mistake with the rules,

I had used RPCS3 on my desktop with minimal issues before and decided that it would be pretty lucrative for me to install it on my steam deck as well.

Unfortunately (after quite literally hours of troubleshooting half a dozen different issues), one issue, in particular, has stumped me and I can't seem to find anyone with the same issue

I will use Uncharted: Drakes fortune to describe the issue, this ROM in particular is the exact same one I am using on my Desktop

The game launches just fine, I can create a save for my new game and it will launch into the opening cutscene without so much as a stutter
however, once the cut scene completes the game simply freezes, with no hard crash or (to my untrained eye) blaring errors in the log just an infinite suspension (30 minutes was the longest I let it stew)

I tried with another one of my classic favourites, the last of us, and it has identical symptoms, the game launches, I can start a new game and save yet after that really cool particle effect for a loading screen, it freezes,

Hoping someone can give me a hand with this cause I am completely stumped

TL;DR
games load and run just fine on my steam deck up until the actual game part starts, once 3D is required the RPCS3 just freezes and soft crashes, have tried on uncharted 1 and the last of us with identical results
hours of troubleshooting and messing with various settings that I don't fully understand has unsurprisingly yielded nothing, hoping for a guru to help me out, Thanks!

Reply

Attached Files
RPCS3 Freezes every time the 3D part of a game starts (2)RPCS3.log.7z (Size: 253.21 KB / Downloads: 1)

Ani
Administrator
RPCS3 Freezes every time the 3D part of a game starts (3)RPCS3 Freezes every time the 3D part of a game starts (4)RPCS3 Freezes every time the 3D part of a game starts (5)RPCS3 Freezes every time the 3D part of a game starts (6)RPCS3 Freezes every time the 3D part of a game starts (7)RPCS3 Freezes every time the 3D part of a game starts (8)RPCS3 Freezes every time the 3D part of a game starts (9)


16
4,335 posts

10-01-2022, 11:33 PM -

#2

Log shows a non official build is being used

Either way, with or without stability, the performance for this game is not going to be anywhere near Playable on a CPU as weak as the one in the Steam Deck

Reply

Desktop:Ryzen 7 5800X, Radeon RX 6800 XT, 2x8G DDR4 3600MHz, Manjaro Linux
Laptop: Ryzen 9 5900HX, Radeon RX 6700M, 2x8G DDR4 3200MHz, Manjaro Linux
Old Desktop: AMD FX-8350, Radeon R9 280X, 2x4G DDR3 1600MHz, Manjaro Linux

NovaDorium
Member


0
3 posts

10-01-2022, 11:48 PM -

#3

(10-01-2022, 11:33 PM)Ani Wrote: Log shows a non official build is being used

Either way, with or without stability, the performance for this game is not going to be anywhere near Playable on a CPU as weak as the one in the Steam Deck

that's very bizarre, I downloaded the version from the built-in package manager, I assumed it was the flatpack version. Not sure how it could be an unofficial build but will look into it

Also looking at the minimum system requirements it does look like the steam deck does manage to meet them and in some cases exceed them (I understand it's still not a powerful PC by any means), I'm sure it will still struggle with more demanding games like the last of us and uncharted, wasn't expecting perfection, but I would like to get some games working,
even if only to toy with some less demanding games down the line

is there any setting you could think of that I may have incorrectly set that would cause the weird issue I have been having? I did manage to get infamous to run after a light bit of tinkering, doesn't run well mind you but still, and I have no clue what I did differently with that game cause the others still don't run

Thanks for your help!

Reply

yurinator557
RPCS3 Tester


4
368 posts

10-02-2022, 08:31 AM -

#4

The only official release for Steam Deck is the official AppImage, use that and upload another log with that build

Reply

NovaDorium
Member


0
3 posts

10-02-2022, 10:07 PM -

#5

(10-02-2022, 08:31 AM)yurinator557 Wrote: The only official release for Steam Deck is the official AppImage, use that and upload another log with that build

Hey, looks like that was the issue, thanks! damn pacman version, not sure where it came from but hey, its bad.

With a bit of tinkering I even managed to get Uncharted to a "playable" framerate of 15 - 20 FPS,
Will see if I cant keep toying with settings or maybe just play simpler games.

Reply

RPCS3 Freezes every time the 3D part of a game starts (2024)

FAQs

How do I make my RPCS3 more stable? ›

Using Prefer borderless fullscreen option can help if you have issues with streaming RPCS3 gameplay or if your system incorrectly enables HDR mode when using fullscreen. Try fiddling with this setting when encountering unstable games. The higher value, the better stability it may provide.

Why does my game freeze mid game? ›

Here is a list of main reasons that may cause your games to freeze in Windows 10/8/7: High CPU or RAM Memory usage. Graphics card low performance. Low Internet speed, unstable network connection.

Is RPCS3 CPU or GPU heavy? ›

Unfortunately, as of now, RPCS3 primarily relies on the CPU for emulation. While the GPU is used to render the graphics and improve the visual experience, the actual emulation process heavily relies on the CPU's processing capabilities.

Is there a better emulator than RPCS3? ›

RetroArch. A different kind of emulation experience that offers a similarly reliable experience as RPCS3 is the front-end collection of emulators called RetroArch. While RetroArch isn't designed for PlayStation 3 emulation, the software contains valid ways of emulating PlayStation 3 games.

How do I fix freezing while gaming? ›

Part 2: Solutions to fix the Computer Freezes when playing Games Issue
  1. 1 – Restart your PC/Windows. ...
  2. 2 – Turn off Onboard Audio. ...
  3. 3 – Modify Games Settings. ...
  4. 4 – Check for the presence of viruses and malware. ...
  5. 5 – Delete Temporary Files. ...
  6. 6 – Disable certain background tasks. ...
  7. 7 – Update Drivers. ...
  8. 8 – Improve Internet Speed.

Why is my game freezing every second? ›

If you're computer is freezing while running a full screen game then it is almost always the graphics driver. Look in the Event Viewer and you'll likely see errors related to the graphics driver timing out and having to be restarted.

What makes your game freeze? ›

Game files can become corrupted or altered if you have malware or are running a game modification on your device. If your game is freezing or not responding, uninstalling and reinstalling it will remove and replace the files that run the game.

How do I increase my FPS stability? ›

How to boost FPS and optimize your PC for gaming: 12 top tips
  1. Install an in-game FPS counter.
  2. Overclock your graphics card.
  3. Upgrade your graphics card.
  4. Upgrade to an SSD.
  5. Upgrade your computer's RAM.
  6. Disable SuperFetch and Prefetch.
  7. Defrag or TRIM your disk.
  8. Tweak the Nvidia Control Panel.
Nov 21, 2023

How stable is RPCS3? ›

RPCS3 is stable enough to boot into games and play many of them with ease. Stability is more of a per-game factor that may change with new builds as new features get implemented. As emulators progress in accuracy, there may be some regressions that occur and stability is typically one of them.

What is the most stable RPCS3 build? ›

Which is the best build of RPCS3? For the majority of users, the latest master build is the best to use for everything. Using the latest master ensures users are taking advantage of the latest improvements and bug-fixes offered by the developers.

How can I make my emulator run better? ›

Most emulators have various settings that can be adjusted, such as resolution, frame rate, sound, input, and filters. You can tweak these settings to improve the speed, quality, or compatibility of the emulator. As an example, lowering the resolution or frame rate can help boost the emulator's speed or reduce lag.

References

Top Articles
Latest Posts
Article information

Author: Edwin Metz

Last Updated:

Views: 6246

Rating: 4.8 / 5 (78 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Edwin Metz

Birthday: 1997-04-16

Address: 51593 Leanne Light, Kuphalmouth, DE 50012-5183

Phone: +639107620957

Job: Corporate Banking Technician

Hobby: Reading, scrapbook, role-playing games, Fishing, Fishing, Scuba diving, Beekeeping

Introduction: My name is Edwin Metz, I am a fair, energetic, helpful, brave, outstanding, nice, helpful person who loves writing and wants to share my knowledge and understanding with you.